Description
Specifications:
Analog EZHD/SD Inputs – 4
HD Video Resolutions – EZHD / HD-TVI 720p30(25), 720p60(50), 1080p30(25)
Analog CVBS Video Input – Up to 960×480,720×480(NTSC); 960×576,720×576(PAL)
Adaptive Ports – Input Format Auto Detection, EZHD/SD can be mixed in any combination, at any time
Interface – BNC Connector; 1V p-p, 75?
Privacy masking – 4 areas programmable in OSD menu
Additional OMNI-IP Plug-and-Play Channels (up to 2Mpixel) – 1
Total Cameras Supported – 5
Video Output
-Main HDMI & VGA – Full HD 1920 x 1080/60Hz; SXGA: 1280 x 1024/60Hz;, 720P: 1280 x 720/60Hz; XGA: 1024 x 768/60Hz, 1, 2×2, 1+5, 1+7, 3×3, 4×4 split; User Defined Sequence / Alarm Pop-up
Recording
-Video Compression – Dual Stream: H.264 for Main Stream and Sub-stream
-Video Bitrate – 32Kb/s~6Mb/s each channel
-Encoding – Main Stream: 1080p; 720p; WD1; 4CIF; VGA; CIF Sub Stream: WD1; 4CIF; CIF; QVGA; QCIF
-Frame Rate – Main Stream: 1/16 fps ~ Real time frame rate Sub Stream: 1/16 fps ~ Real time frame rate
-Quality – 6 levels: Lowest/Lower/Low/Medium/Higher/Highest
-Mode – Continuous; Motion; Alarm; Motion or alarm, Motion + Alarm
-Motion Detection – Configurable per camera for area(s), sensitivity and arming schedule programmable by day of week and hour of day
-Schedule Period – Per day in 1 hour blocks; or 8 time periods per day, each with different record mode; plus holidays
-Pre- and Post- Event Recording – Pre-record 0~30 seconds; post record 5s~10 minutes
Playback
-Synchronous Playback – 4 channels
-Playback Resolution – 1080p, 720p, WD1, 4CIF, VGA, CIF, QVGA, QCIF
-Search Type – Time/Date; motion or log event; Manual Tags; Smart Search for motion events from recorded video
-Capacity – Up to record rate
-Playback Controls – Play; Pause; Forward/Reverse; speed control for single~1.8~16X; Slide bar with overview of record type and snapshot display from slider position
-Digital Zoom During Playback – Supported on Local Displays and CMS
Event & Alarm
-Event Source – MD (Motion Detection), Video Loss, Video Tampering/Exceptions
-Event Action Schedule – Per day in 1 hour blocks; or 8 time periods per day, each with different record mode; plus holidays
-Event Action – Buzzer, E-mail, Alarm Full Screen Pop-up, Notify CMS Client
-MD Area – User selectable grid pattern 22×15 areas with adjustable per camera sensitivity
System Alarm
-Alarm Source – HDD Error, HDD Full, LAN Fail/Address Conflict, Illegal login, Video Signal Exception/, Record/Capture exception
-Alarm Action – Buzzer, E-mail, Notify CMS Client (network permitting)
Audio
-Two-way audio – Audio input pass through to remote web or CMS client; remote audio from web or CMS client pass through to audio output
-Input / Output – 1ch Input / 1ch Output; RCA, 2V p-p, 1K?
Network
-Compression – Up to 64Kbps, G.711u
-Interface – 1Gb/s 1000 Base-T Ethernet RJ-45
-Addressing – Static IP, DHCP, xDSL support
-NTP/DST – Supported; choice of time zone, NTP server, DST start/end/offset
-Protocols Supported – TCP/IP, PPPoE, DHCP, DNS, DDNS, NTP, SMTP, SNMP, NFS, iSCSI, UPnP, HTTPS, KT&C Plug-and-Play (for connected IP Cameras), OMNI -Utility Device Discovery
-NAT – uPnP router NAT/port mapping forwards ports automatically (*Router must support/permit uPnP function)
-Users – Up to 128 simultaneous connected users
-DDNS – Simple DDNS free service tracks WAN IP address and HTTP port
Security
-User IDs – “Admin”, plus multiple configurable login IDs
-User Levels – All rights for “admin”; Per camera per user rights assignment for Operator and User levels
-User Privilege Control – Local and remote access to Live views, audio, recording, playback, menus, PTZ, alarms, copy, logs, upgrade, reboot
Storage & Clip copy
-HDD Storage – 1 SATA HDD up to 4Tb
-NAS/SAN – up to 8 network disks (8 NAS disks, or 7 NAS disks +1 IP SAN disk)
-Copy Type – Multi-Channel or Single Channel File
-Copy Device – USB 2.0 Drive (3 ports)
-S.M.A.R.T. – Temperature, duration, error rates, bad sector detection, and more
Serial & I/O
-USB 2.0 Ports – One front, one rear for mouse and data I/O
-RS-485 – One; selectable speed and bit pattern; multiple protocols (Pelco P, Pelco D, others)
-Up the Cable Control – Multiple protocols, can be sent out of any BNC port to compatible cameras
User Controls
-Local Controls – Front Panel camera, function and navigation buttons; IR Remote; Mouse
Software
-Web Viewer – Live view, playback and configuration via IE, Chrome, Firefox, Safari (with free plug-in/extension installed)
-User Rights Control – Per user-per camera for multiple functions
-Mobile Viewer – iOS and Android supported ; live 1 & 4 camera views; single camera playback; snapshots from live or play; copy clips/record to smartphone; audio support; PTZ control. HD version of app, optimized for tablets, displays up to 16 live view cameras
-CMS – Free PC and MAC Clients support multiple device viewing, playback (with digital zoom) and configuration; user rights per camera; E-map support; live view up to 64 cameras in 4:3 and 48 cameras in 16:9; up to 16 cameras in playback
-Event Logging – Multiple types: alarm, exception, operation, information; dozens of sub-types within each major type
-Firmware Upgrade – From USB or remotely
-Backup/Restore Configuration – From USB or remotely
-General Dimension (W x H x D) – 12.4″ x 9.5″ x 1.8″ | 315 x 242 x 45 mm
-Chassis Type – Standalone 1U chassis
-Weight without HDDS – 3.3 lb. / 1.5Kg
-Operating Temp – 14F~131F (-10C~55C)
-Operating Humidity – 10% ~ 90%
-Voltage – 12VDC from included power supply, 4 pin DIN; power supply input voltage 100~220 VAC 50~60Hz
-Power – Up to 15W
-Certifications – FCC, CE, RoHS
